Problem: No sound out for speaker and microphone
Reason 1: The headset model is not compatible with the telephone.
Solution: Find your telephone’s brand and mode from the back of the telephone. Click at the compatible brand name on the left column of www.ovislink.com. Different headset models will show on the web page. Find your phone’s model under the headset images and click at the headset image will bring you to the headset model detail page. If it is not the one you purchased, contact support@ovislink.com to exchange to the correct headset model.
Reason 2: Didn’t use the headset correctly.
Solution: Connect the headset to the telephone’s headset jack directly. Press the headset button on the telephone’s keypad to get dial tone, answer a call and hang up a call. Do not pick up the hand receiver from the telephone hood. Some telephone models use speaker phone button as the headset button. Some telephone use soft button for headset, some have to program a headset key before you can use a headset. Refer to your telephone user manual for details. There are more instruction on headset model pages on www.ovislink.com.
Problem: headset speaker works but microphone doesn’t.
Reason 1: The headset model is not compatible with the telephone.
Solution: Find your telephone’s brand and mode from the back of the telephone. Click at the compatible brand name on the left column of www.ovislink.com. Different headset models will show on the web page. Find your phone’s model under the headset images and click at the headset image will bring you to the headset model detail page. If it is not the one you purchased, contact support@ovislink.com to exchange to the correct headset model.
Reason 2: If the headset is connected to the telephone with 2.5mm headset jack, the 2.5mm connect doesn’t all the way into the headset jack.
Solution: Push the 2.5mm connector hard to the phone’s headset jack until hear two click sounds
Problem: hear statics or noise from the headset.
Reason 1: The headset model is not compatible with the telephone.
Solution: Find your telephone’s brand and mode from the back of the telephone. Click at the compatible brand name on the left column of www.ovislink.com. Different headset models will show on the web page. Find your phone’s model under the headset images and click at the headset image will bring you to the headset model detail page. If it is not the one you purchased, contact support@ovislink.com to exchange to the correct headset model.
Reason 2: May be broken wire inside the headset.
Solution: Get the headset serial number from the headset cord and email to support@ovislink.com
Problem: hear echo from when use headset with Polycom phones.
Reason: echo canceling function is not turned on.
Solution: To enable the echo cancelling function on Polycom phone:
- Press the Menu button on the phone.
- Go to Settings.
- Go to Basic.
- Select Preferences.
- Select Headset.
- Select Echo Cancellation.
- Select Enable.
- Once enabled, press the left arrow key to go back to the home menu.
Different telephone brand and models may be different. Please go to compatible brands page to find more details.
How to choose a telephone headset?
If you talk on the phone for long hours, you need a headset that gives you natural human voice, that is noise and static cancelling (some people are able to ignore static if it only happens for a short period of time, but if there is static on the ear for hours every day it will cause a big discomfort), that is comfortable to wear, and durable. Find the headset model that is compatible with your telephone. OvisLink designs its headsets keeping in mind the comfort of its users and aims for the best shape fit with regular people’s ears. For users who like to use single ear headsets, OvisLink headsets’ microphone boom is rotatable and manageable that users have the option to place the earpiece on the left or right ear at anytime. OvisLink stands behind its products and provides two year warranty for every headset sold. OvisLink makes a variety of call center headsets compatible with different desktop phone systems; to find visit our Compatible Phone Brand Section at www.ovislink.com, locate your telephone brand and model, and then select a headset that's specially designed to work with your phone system.
How to choose between single ear and dual ear headset?
OvisLink makes single ear and dual ear headsets for each of the telephone brands and models. The single ear headsets (monaural) are an ideal solution for people who need to communicate with nearby colleagues while maintaining their headset conversation. Monaural headsets are almost always lighter that binaural headsets. The dual ear headsets (binaural) consist of a pair of earpieces and a microphone. This type is ideal for people who work in places where you need to exclude the background noise and focus on the conversation on the phone only.
How do I know if my headset model is compatible with my phone?
On the left column of www.ovislink.com click the name of telephone’s brand, a new page will open for that particular brand providing the brand’s models. After selecting a model, the headset models compatible with the telephone will appear. There are single ear and dual ear headsets that have telephone models listed below. Click at the headset image to get to the product detail page to place an order.
* If you can't find your desk phone's brand name from the left column, enter the phone's brand name into the search field (at top of this page) to search it. If still can't find it, email us at sales@ovislink.com, we'll reply on the same business day.
How to set up telephone headset?
No setup needed. Simply connect headset jack onto the headset port on the phone. After the headset is connected to the phone, the user should press the headset key in order to hear a dial tone from the headset’s speakers. If no headset key is available, the user might have to program a headset soft key or use the speaker button on the phone based on telephone’s user guide.
How to connect telephone headset?
OvisLink headsets are designed to connect directly to the telephone’s headset jack. Make sure to buy the compatible headset model for your phone (see compatible list), the headset will come with a connector that fit with your phone’s headset jack. Plug the connector into your phone’s headset jack.
How to use telephone headset?
OvisLink call center headsets are simple to install and use. They connect directly to a desktop phone and do not require the use of an amplifier. Connect to the phone’s headset jack directly, then press the headset button on the phone to hear a dial tone through the speaker. To make a call press the headset button, to disconnect a call also press headset button. Location of headset button varies depending on brands and models, some have the headset button printed on the telephone’s keypad, others need to be programmed using a programmable key, and in other cases the use of the “speaker” key serves as a headset button.
How to wear telephone headset?
For single ear headsets adjust the length of the headband and turn the earpiece slightly until the headset fits comfortably and position the T-bar above your ear. Rotate the microphone boom to put the microphone in front of the mouth. Lastly attach the clothing clip at a comfortable level to keep the headset properly positioned and free from the cord’s weight.
Dual ear headsets do not have a T-bar; in this case adjust both ear pieces slightly until headset fits comfortably.
How to take care a telephone headset?
Clean your headsets on a regular basis. Take care of the cords; do not use the cord to wrap the headset. When disconnecting the quick disconnect cord from the headset, hold the flat spot of the connector, and pull straight out without wiggling the connector. Do not wiggle the joints of the cord and never pull on the cord to remove it from the device. Only remove the device directly at the adapter, or the cord might break off from the adapter and the interior wires will fray. The microphone boom is manageable. You may adjust it to position the microphone to the desired spot, but do not pull the microphone boom.
How does a headset training adapter work?
The OvisLink headset training adapter is for call center training purposes. It connects two headsets to the same phone. There is a mute button for each of the headsets. The trainer and trainee can both hear and talk on the same call. The trainer may mute at any time either one or both headsets the headsets.
How to use a training adapter?
No software is necessary to use the OvisLink training adapter. Simply set the T-adapter switch to the “1” position, and then connect one end of RJ9 small cord onto the TEL port on the adapter and the other RJ9 end to the phone. Connect both headphones to the ports labeled as A and B. Press the A button to mute the headset plugged into the A port, and press B to mute the B headset. The OvisLink call center headset T-adapter will enable your trainers to effectively monitor and train new hires.
How to use a telephone headset on computer?
Headsets with RJ9, RJ45 and 2.5mm jacks cannot connect directly to a computer. OvisLink headset’s quick disconnect function allows users to disconnect the quick disconnect cord from the headset and replace with an OvisLink USB quick disconnect cord that lets customers use the headset with any computer that has USB port, this includes Windows, Mac and Linux. Searching for model number QD-USB on www.ovislink.com directs customers to the USB quick disconnect cord page.
Do I need an amplifier for telephone headset?
No, with OvisLink call center headsets, you don’t need an amplifier to work with your telephone. OvisLink headsets are designed connect directly to telephone’s headset jack. The headset’s volume is good enough without any amplifier.
Do I need a lifter to use with headset?
No, when using OvisLink headsets, you don’t need to lift up the hand receiver. Instead, press the headset button on the telephone’s keypad to get a dial tone on the headset or to hang up the call.
What is the best telephone headset?
A headset that makes life simple, like OvisLink headsets that helps improve work environment by providing the comfort needed for a long day’s work, easy to use for optimal productivity and great sound quality with crystal clear human voice quality for those every day phone calls.
What is a call center headset?
A call center headset is designed to be a hands-free tool for long work phone calls every day. A good call center headset, like OvisLink headset gives users premium human voice quality; no noise or static, and can be worn all day and still have the comfort needed for work calls, plus is durable.
What is binaural telephone headset?
A Binaural headset is a headset that has two earpieces (speakers).
What is RJ9 headsets jack?
RJ9 is a registered modular 4P4C connector that comes on telephone handsets and headsets. It looks like a regular telephone line connector but only smaller. The regular telephone line connector is RJ11 and can sometimes be confused with RJ9.
What is 2.5mm headset jack?
A small round pin connector with 2.5mm diameter and 3 conductor or 2 black rings which is commonly used for home office phones.
What is 3.5mm headset jack?
The 3.5mm headset jack is a small round pin connector with 3.5mm diameter and 4 conductors or 3 black rings to connect to 3.5mm headset jack which now is more commonly used with smart phones.
What is a quick disconnect cord?
Quick Disconnect cords are lower part on the long cord of OvisLink call center headsets. It connects to the same type of connector on the headset. The connection can be disconnected and reconnected during a telephone call without dropping the call.
Quick disconnect function gives users the convenience easily detach the headset from the phone, walk away and return to the call without hang up the call or put the call on hold. It also gives users the option to use the headset with different telephone brands and computers using different quick disconnect cords that are available for purchase on www.ovislink.com. OvisLink quick disconnect cords are only compatible with OvisLink headsets; users cannot use OvisLink quick disconnect cords with other headset brands.
What is a telephone headset with volume control (do I need to have a telephone headset with volume control)?
The volume control feature on the headset allows customers to adjust the speaker volume of the headset on the headset cord. The volume buttons on the telephone also control the headset’s speakers. Volume control function on the headset cord is just an option.
What is a telephone headset with mute function (do I need to have a telephone headset with mute function)?
The mute function cancels out sound on the headset’s microphone. If a client is on a call he/she can mute the headset’s microphone for any reason by pressing the mute button on OvisLink headset models OVHS072-V25, OVHS084-V25, OVHS072-USB and OVHS084-USB. There is always a mute button on the telephone’s keypad which does the same thing. The mute button on the headset cord is only an option.
What is a headset training adapter?
A training adapter allows users connect 2 headsets to one phone for training purposes. Both headsets’ speakers and microphone can work at the same time. There are two mute buttons for the headsets connected to the adapter. The trainer may decide to mute any connected headset by pressing the coordinated mute button.
What is a dial pad telephone?
A dial pad is a complete phone that doesn’t include a handset but uses a headset instead and connects to regular phone line or VoIP adapter. It’s usually used in call center settings.
What is an IP phone headset?
IP phone headsets are headsets that are compatible with IP phones. There’s no difference between an IP headset and telephone headset. The most important thing is that the headset must be compatible with the telephone.
What headset should I choose for my desk phone?
You must choose a headset that is compatible with your phone. If you are on the phone for long periods of time, choose a premium voice quality OvisLink call center headset. OvisLink headsets give you great voice quality and comfort for all-day use.
Can I use a desktop phone headset with a computer?
Yes, OvisLink headsets have a quick disconnect function that provides the convenience to swap the bottom cord with different connectors. To use with computer, you need an OvisLink USB quick disconnect cord. Search the model “QD-USB” on www.ovislink.com can lead to the product detail page.
Can I use desktop phone headset with cell phone?
Depends, Android and Apple smart phones are different. For Android cell phones you may purchase and swap your regular desktop quick disconnect cord for a 3.5mm OvisLink Quick disconnect cord, model QD-S35. Search model number "QD-S35" will bring you to the 3.5mm quick disconnect cord page.
Apple iPhones have Lightning port but not 3.5mm port. You may use OvisLink wireless Call Center headset with Apple iPhones. Here is the link to wireless Call Center headsets for Apple iPhone Wireless Call Center headsets.
Can I use desktop phone headset with a PC?
Yes, swapping for a USB Quick disconnect cord. Search QD-USB on www.ovislink.com will bring you to the USB quick disconnect cord detail page.
Can I use desktop phone headset with an Apple laptop?
Yes, swapping for a USB Quick disconnect cord. Search QD-USB on www.ovislink.com will bring you to the USB quick disconnect cord detail page.
Can I use desktop phone headset with Linux?
Yes, swapping for a USB Quick disconnect cord. Search QD-USB on www.ovislink.com will bring you to the USB quick disconnect cord detail page.
